Showing 1–12 of 15 results
Basifon Water Based Binder 1L
£17.57Add to basketWater-based binder to mix with the sawdust of the woodWith Basifon W, you can fill up the wood with the exact correct color. Can be used to fill up holes, knots, tears of furniture or parquet floors
- No odor / water-based
- Restores the parquet in its original color
- Can be tinted
- Dries quickly
- Useable for all finishing products of Basin
Packaging: 1L or box with 8 x 1L
Color: uncolored
Mixing ratio:
– For a fluid product (e.g. surface, small cracks) you can add about 20% sawdust
– For a solid product (e.g. to fill up knots) it is better to add about 50% sawdustDrying time: 15 to 30 min
Basin Basintage Reactive Stain plus activator
£168.96Add to basket- 100 % ecological
Water-based and with colour dyes that do not contain any heavy metals. - Stable and reproducible stains
The aged parquet manufacturing business searches for stable antique finishes in time for large productions and reproducible products for their resellers. - Revolutionary
One can obtain an aged look in only one (stain) layer, while the traditional antique staining method requires multiple applications. - Stability under light exposure
The shades are light-stable provided that they are covered withs 3 coats of BASIFIX to protect them against the yellowing of the wood. - Washable aged effect
After application with the BASINTAGE RS stain and drying, one can wash the wood with water and obtain a washed effect that gives another type of “aged” effect. - Unlimited choice of wood species
One can colour wood species like American oak, softwood, light-coloured exotic wood etc. - Oiled finish
The BASINTAGE RS stains can be treated with BASINTAGE OIL. 
- 100 % ecological
Basin Basiplus Reactive Stain 2.5L
£93.41Add to basketWater-based reactive stainsThe Basisplus-stains are ecological, water-based stains which are produced using dyes and pigments, resistant to light and UV-rayes. By these (UV-)light resistant pigments, sunlight does not effect the colour of the parquet.
By reacting with the tannic acid, the wood obtains a unique aging effect which highlights the grains and wood structure beautifully. The aging effect is just like the natural aging of wood, especially with dark growth rings on resinous woods and the patination of hardwood.BS-1070: Snow White
BS-1790: Café Russe
BS-1793: Old Wood
BS-1795: Antik Wood
BS-1797: Double Smoked
BS-1799: Bitch Red
BS-7300: Washed Grey
BS-8114: Mud Grey
BS-8160: Imperial Grey
BS-8161: Vintage GreyBasin Block Primer NC-21251 2.5L
£52.01Add to basketPreserves the natural colour of the wood
Ideal for protecting water-based stains
Reduced odor
Fast dryingConsumption: 1L for 10 m²
Basin Isolation Primer 2.5 L
£47.15Add to basket- Suitable for newly or completely sanded parquets.
- Especially suitable for exotic wood types, containing a lot of tannic acid.
- On the Antico colour system, Isolation Primer can be as fixative layer before finishing with 2K water-based topcoats.
- Can also be used to keep the colour of certain Nitro stains (view technical datasheet).
- Not suited for waxed parquet.
Basin Protect HD-4008
£132.36Add to basket- No retreatment needed.
- Natural effect.
- Extra mat.
- Slightly accentuates the wood.
- Very high wear resistant.
- Environmental friendly.
- Short drying times.
- No yellowing of the protection over time.
Advantages
- Suited for new or sanded to bare wood parquets in living rooms, public places, commercial spaces, restaurants and other places where the floor is subject to intensive use and a high chemical resistance is necessary.
- Suited for all kinds of wood (oak, pine, maple, ash, beech, elm, …).
- For all kinds of interior wood (staircases, massif wooden parts of furniture, paneling, …).
- For light colours, stained or tannin rich wood, a special primer HBN-05100 will optimize the result.
- NOT suited for veneer (= wood of which the thickness of the massive wooden wearing course is smaller than 2,5 mm – view WTCB).
No Visible 2 component Lacquer – Invisible Protection for intensive use
£143.74Add to basketThis 2 component water-based varnish with an invisible look is designed for finishing new, untreated or freshly sanded wooden floors as well as other rough wood parts, providing a long-lasting (rough wood / clear natural look) and matt finish that prevents the wood and varnish from yellowing in time.Pay attention: only suitable for light wood and not suitable for veneer thinner than ± 1,5 mm, to avoid glue penetration.- Ecological
- No yellowing
- Permanent components against the yellowing of the wood
- High abrasion resistance
- No odour nuisance
- Very low VOC level
- Dries quickly
- Stain resistant
- Not sensitive to frost (transporation)
No Visible Green +
£126.70Add to basketThis invisible 2 component water-based varnish is designed for finishing new, untreated or freshly sanded parquet as well as other rough wood parts, providing a long-lasting and matt finish.Pay attention: only suitable for light wood and not suitable for veneers thinner than ± 1,5 mm, to avoid glue penetration. On dark and exotic wood types, we recommend NO VISIBLE NUANCE HPC-5009 + PUR-1010.- More ecological (isocyanate-free)
- Longer pot life (up to 3 weeks)
- No yellowing
- Permanent anti-UV-components
- High abrasion resistance
- No odour nuisance
- Very low VOC level
- Dries quickly
- Stain resistant
BASIN NO VISIBLE OIL HPU-5001 1L
£37.09Add to basketThis invisible 1 component water-based oil has the characteristics of a varnish and is designed for finishing new, untreated or freshly sanded parquet as well as other rough wood parts, providing a long-lasting and matt finish.
Please note: only suitable for light wood and not suitable for veneers thinner than ± 1.5 mm, to avoid glue penetration. On dark and exotic wood types, we recommend NO VISIBLE OIL DARKWOOD HPU-5003.
Download datasheet
BASIN NO VISIBLE OIL HPU-5001 1L Dark Wood
£37.09Add to basketThis invisible 1 component water-based oil has the characteristics of a varnish and is designed for finishing new, untreated or freshly sanded parquet as well as other rough wood parts, providing a long-lasting and matt finish.
Please note: only suitable for light wood and not suitable for veneers thinner than ± 1.5 mm, to avoid glue penetration. On dark and exotic wood types, we recommend NO VISIBLE OIL DARKWOOD HPU-5003.
Download datasheet
BASIN NO VISIBLE OIL HPU-5001 2.5L
£78.24Add to basketThis invisible 1 component water-based oil has the characteristics of a varnish and is designed for finishing new, untreated or freshly sanded parquet as well as other rough wood parts, providing a long-lasting and matt finish.
Please note: only suitable for light wood and not suitable for veneers thinner than ± 1.5 mm, to avoid glue penetration. On dark and exotic wood types, we recommend NO VISIBLE OIL DARKWOOD HPU-5003.
Download datasheet
